Frequently Asked Questions
Place your thumb on the panel above the panel you are trying to remove, and the rest of your fingers behind the panel you want to remove. Apply pressure on your thumb and push the panel forward towards yourself. The brackets can also be unscrewed from the wall, and reinstalled at your new location.
The Twin and Full size beds are packaged in 2 separate boxes.
Box A: Contains 2 side panels and support beams
Box B: Contains front and back bed panels and slats
The King and Queen beds are packaged in one large box.
All in stock bed orders are processed within 24 business hours and ship via UPS ground with 3-5 business day service (except for HI and AL, which may take up to 10 business days). Canadian orders ship with UPS 5-8 day service all duties are prepaid by Vant panels.
King bed: 1200 lbs.
Queen bed: 1000 lbs.
Full bed: 1000 lbs.
Twin bed: 600 lbs
The bed does not attach to the panels in any way.
Our panels are versatile, so depending on your space, you can start anywhere on the wall!
You can begin your configuration 2-3 inches below your mattress so there is no visible space between mattress and panels. If you don’t like the look of the bare wall space between the floor and panels, we would recommend beginning your configuration from the baseboard and continuing your way up until desired height is reached.
Dust regularly. As with all fabrics, avoid direct heat and sunlight.
For Vinyl and PU upholstery: spot clean with damp white cloth. Blot to remove excess water and air dry.
For all Weave, Suede and Velvet upholstery: sprinkle some baking soda on a damp cloth and apply to stain, blotting lightly. Let rest for 2 hours or until dry. Wipe off residue with dry cloth and vacuum.
For tough stains, we recommend consulting with a professional upholstery cleaner.
Since the panel’s base is wood, you can do a cutout from the back of the panel. The cutout should be the size of your electric switch/outlet box. Then, gently cut through the upholstery (be careful not to cut too much, you don’t want the batting from underneath to be visible), pull the box through, and place the outlet cover as you would normally do on a regular wall.
(Use a jigsaw for wood cutout and razor knife for upholstery.)
For a simpler fix, a flat plug extension cord fits in the space between the panel and wall.
The patented anchorless screws are designed with extra wide threads to grip the drywall
so the panels are firmly held in place. No studs or anchors will be needed when mounting your panels onto drywall. For concrete walls, Pre-drill (Drill Bit Size, 3/16(in.) the holes beforehand.
Each screw has the capacity to hold up to 50 lbs.